3BHE019959P201自动化工控卡件
交直流电源装置8.1电源装置的类型
有两种类型的交流至直流电源装置：
a、 8路交流至直流电源装置（零件号05701-a-0406）
1U高半宽19英寸机架安装单元，包含单个50W开关模式AC到DC电源模块。
b、 16路交流至直流电源装置（零件号05701-A-0405）1U高19英寸机架安装单元，包含单个50W
开关模式AC到DC电源模块。
两个电源装置将在85V至264V、47Hz至
440Hz交流电源或110V至340V直流电源（参见齐薇格直流电源信息的分析）。
8.2电源单元升级
两个电源单元均配有内部连接，以：通过添加第二个50W，将功率升级到100W
开关模式AC到DC电源模块（零件号05701-A-0440）。
第二个子单元（零件号05701-A-0441）可以安装到
基本16路电源装置，如果需要超过100W，则：操作系统。附加子单元将包含一个50W开关
模式AC至DC电源模块为标准，因此提供额外的50W可用功率。如果需要，再增加50W
开关模式AC到DC电源模块（零件号05701-A-0440）可添加到该第二子单元，以提供电力
可用性敢达200W。
使用的开关电源模块完全过载被保护并且被设计为连接在一起。
8.3电源连接
输入交流电源通过位于的三芯电缆连接
每个单元的后部。
标称24V直流输出电源通过双芯电缆连接
在每个单元的后部。
50W子单元配有一个50W开关模式AC至DC
电源模块如下所示：
此类装置在标识标签上标识如下：
电源单元05700-A-0405 Iss。2.
输入=85-264V交流输出=24V直流
47-440Hz功率=50W或110-340V DC=100W
表明50W机组顶视图50W切换模式交直流电源供应模块额外50W开关式交流至直流电源单元
8.7 100W子单元布局
100W子单元是一个50W子单元，带有一个额外的50W开关
模式AC至DC电源模块安装
AC TO DC POWER SUPPLY UNITS
8.1 Types of Power Supply Unit
There are two types of AC to DC power supply units:
a. 8-Way AC to DC Power Supply Unit (Part Number 05701-A-0406)
A 1U high half width 19 inch rack mounted unit that contains a
single 50W Switched Mode AC to DC Power Supply Module.
b. 16-Way AC to DC Power Supply Unit (Part Number 05701-A-0405)
A 1U high 19 inch rack mounted unit that contains a single 50W
Switched Mode AC to DC Power Supply Module.
Both power supply units will operate from an 85V to 264V, 47Hz to
440Hz ac supply, or a 110V to 340V dc supply (Refer to Zellweger
Analytics for information on dc supplies).
8.2 Power Supply Unit Upgrades
Both power supply units are provided with internal connections to
enable a power upgrade to 100W by the addition of a second 50W
Switched Mode AC to DC Power Supply Module (Part Number 05701-
A-0440).
A second sub-unit (Part Number 05701-A-0441) can be fitted to the
basic 16-way power supply unit if more than 100W is required to
operate the system. The additional sub-unit will contain a 50W Switched
Mode AC to DC Power Supply Module as standard and will therefore
give an additional 50W of available power. If required a further 50W
Switched Mode AC to DC Power Supply Module (Part Number 05701-
A-0440) can be added to this second sub-unit to bring the power
availability up to 200W.
The switched mode power supply modules used are fully overload
protected and are designed to be connected together.
8.3 Power Supply Connections
The input ac power supply is connected via a three core cable at the
rear of each unit.
The nominal 24V dc output supply is connected via a twin core cable
at the rear of each unit.
The 50W Sub-unit is fitted with a single 50W Switched Mode AC to DC
Power Supply Module as shown below:
This type of unit is identified on the identification label as follows:
POWER SUPPLY UNIT 05700-A-0405 Iss. 2
INPUT = 85 - 264V AC OUTPUT = 24V DC
47 - 440Hz POWER = 50W
OR 110 - 340V DC = 100W
Indicates
50W Unit
Top View 50W Switched Mode
AC to DC Power
Supply Module
Additional 50W
Switched Mode AC
to DC Power Supply
Module
8.7 100W Sub-Unit Layout
The 100W Sub-unit is a 50W Sub-unit with an additional 50W Switched
Mode AC to DC Power Supply Module fitted as shown below:
