您的浏览器版本过低,为保证更佳的浏览体验,请点击更新高版本浏览器

以后再说X

欢迎访问瑞昌明盛自动化设备有限公司网站!

图片名

全国订购热线:
+86 15270269218E-mail:xiamen2018@foxmail.com

ABB >>

A-B>>

GE>>

BENTLY>>

3BHE036204P201

3BHE036204P201

3BHE036204P201工控卡件,3BHE039204P106用户手册输出可能是“浮动的”,但是与“地”的隔离并不充分。一些“医疗级”AC/DC具有操作者保护措施(MOOP),但由于输入/输出和输出/接地的隔离不足,而且AC/DC隔离耦合电容也不够低,所以不适合直接与患者连接。虽然也有具备双重患者保护(2MOPP)的AC/DC可以使用,但功率范围有限而且价格昂贵。多通道传感器通常需要多个相互隔...

  • 功能特性
  • 参数规格
  • 视频
  • 应用案例
  • 下载

3BHE036204P201

    3BHE036204P201工控卡件,3BHE039204P106用户手册

    输出可能是“浮动的”,但是与“地”的隔离并不充分。一些“医疗级”AC/DC具有操作者保护措施(MOOP),但由于输入/输出和输出/接地的隔离不足,而且AC/DC隔离耦合电容也不够低,所以不适合直接与患者连接。虽然也有具备双重患者保护(2MOPP)的AC/DC可以使用,但功率范围有限而且价格昂贵。多通道传感器通常需要多个相互隔离的电源轨,但可以肯定的是,只有完全定制的2MOPP AC/DC才会具备全部所需的电源轨。DC/DC可以构成隔离系统的一部分

    3BHE039203R0101 3BHE036204P201 3BHE039204P106 GVC736CE101 (1).jpg

    3BHE036204P201工控卡件,3BHE039204P106用户手册一种解决方案是使用标准的2MOOP医疗级隔离的AC/DC转换器,然后以一个或多个医疗级DC/DC转换器来为传感器增加另一级的隔离。这些转换器提供所需的传感器电压轨,如果它们具有高隔离和低耦合电容就可以进一步成为隔离系统的一部分,来满足最严格的“心脏漂浮”(CF)类设备的应用。图2显示了具有接地外壳或 “Class I” 电气配置系统的典型连接使AC/DC具有2MOOP,DC/DC转换器也需要2MOPP,因为有未指定的设备(SIP/SOP)连接到DC/DC输入端,这可能在故障的情况下产生危险电压。

    如果设备是“Class II”电气设备,即没有接地连接,并使用未指定外部连接的塑料外壳,但如果AC/DC至少具有2MOOP的隔离,那么DC/DC转换器可以只需要1MOPP等级的隔离(D),用于直接与患者连接的应用。DC/DC通常只需提供低功率电源,不仅体积小成本也低。

    DC/DC转换器的典型应用如图3所示。这里使用一个仪表放大器作为ECG传感器,为分析提供数字数据。另一个DC/DC为驱动器供电,驱动器为患者进行某种刺激,并且与传感器隔离。数据则用光偶进行隔离。仪表放大器通常需要+/-5V的电压,驱动器则需要+12V的电压。由稳压系统电压供电的两个2W板载DC/DC转换器提供隔离的电压轨。由于是稳压输入且负载恒定,因此DC/DC可以是简单、低成本的 “非稳压” 转换器,只需百分之几的负载调节率,即可获得足够的性能。DC/DC转换器可以为其他测量或刺激通道提供更多隔离的电源轨。DC/DC转换器的小尺寸和设计使其具有极低的耦合电容,因此漏电流极小。

    DC/DC转换器会产生噪声

    所有高效率的DC/DC转换器都是“开关式”电源,因此会产生传导和辐射电磁噪声。

    power supply and maintain the operation of key systems. Weidmuller protop series power supply is resistant to high temperature and humidity, has better protection, and is not easy to "condense". At the same time, the maxguard electronic fuse for electronic load monitoring is installed on the output side of the power supply, which can increase the protection level and carry out rapid fault diagnosis. Weidmiller's solution in the form of "combined fist" ensures that the processing of tobacco is more smooth. The high reliability, durability and compactness of Weidmuller protop power supply make it the first choice of customers. Thanks to the patented DCL Technology (DCL - output dynamic overcurrent), protop has a very good dynamic range of output overcurrent, which can reliably trigger the circuit breaker and drive the start and operation of high-power equipment. In the threshing and redrying production line, protop provides stable, lasting and efficient DC output. At the same time, the production line also requires continuous and stable power margin, long service life and low sensitivity to overvoltage, ambient temperature or vibration, which are what Weidmuller protop power supply is good at.

    The innovative electronic load monitoring maxguard integrates the equipotential distribution terminals that used to be installed independently to form a 24V DC power distribution system, which can save up to 50% of the space and 20% of the installation time. Maxguard has a modular design, which shows its advantages in the threshing and redrying production line incisively and vividly. Its transverse connection mode between various modules 


    品牌:ABB

    型号:3BHE036204P201

    产地:瑞士

    质保:365天

    成色:全新/二手

    发货方式:快递发货


图片名 客服

在线客服 客服一号