IS200VTURH2BAC燃机模块
单个大功率 AC/DC 转换器的运行功率高于多个较小转换器的运行功率。尽管单个电源都尽可能保持较低的内部功耗，但多个电源的内部功耗仍会叠加起来。例如，如果一个设备机架装了十二个独立的 100W 电源，每个电源的内部功耗为 2W，总损耗加起来为 24W。相较之下，一个大型转换器的损耗仅 2W。如果齿轮托盘连续运行，每年可节省约 200 kWh。RACM1200 的空载功耗为 0.75W（主输出关闭，辅助输出保持运作），满足「80 Plus Platinum」和「Ecodesign Lot 6」的效率要求。
IS200VTURH2BAC燃机模块输入电压范围为 85VAC 至 264VAC。RACM1200-V 提供 1000W 输出功率，配备接触式冷却的金属外壳，体积仅 102mm x 229mm x 40mm。输出功率可达1200W并维持10秒以上。然而，若要 1200W 连续输出就需要配备风扇并确保有2.5m/s的空气流动。风扇可由用户控制，为此提供了一个可控的辅助输出以进行温度管理。RACM1200-V的重要数据
输出功率：40°C环境温度和230V输入电压的输出功率为1000W；使用风扇或短峰值负载可达1200W。包含连接器的尺寸（长x宽x高）：228.0mm x 96.2mm x 40.0mm; 其他供应商产品的连接器会受到机械冲击。输入电压：85V至264V
输出电压：
24V类型可通过DIP开关在100mV至28V的范围内进行调节。
48V类型可通过DIP开关在200mV至56V的范围内进行调节。
最大输出电流：50A @ 24V、25A @ 48V。
主输出和辅助电压的保护功能：
-过载保护、自动复位
-过电流和短路保护、自动复位
-过热保护、自动重启
温度范围：-40°C至80°C，50°C开始降额；请详见数据表
在40°C环境温度下的使用寿命：88,000小时
最大输出电压纹波：输出电压的1%
输出电压容差：25%°C通常为1%，在更高的温度下最多±2%
标准认证：IEC/EN 62368、UL/IEC/EN 60601
符合IEC/EN 61558-2-16、IEC61010-1以及IEC62477-1 OVC II最高2000m
通过铝基板或强制气流进行冷却。
The minimum spacing of wires is mainly determined by the insulation resistance and breakdown voltage between wires in the worst case. For integrated circuits, especially digital circuits, as long as the technology allows, the spacing can be less than 0.1 ~ 0.2 mm.③ The bend of printed wire is generally circular arc, and the right angle or included angle will affect the electrical performance in high-frequency circuit. In addition, try to avoid using large-area copper foil, otherwise, copper foil expansion and falling off will easily occur when heated for a long time. When a large area of copper foil must be used, it is best to use a grid shape, which is conducive to eliminating the volatile gas generated by the heating of the adhesive between the copper foil and the substrate.
4. PadThe central hole of the pad is slightly larger than the diameter of the device lead. If the pad is too large, it is easy to form false soldering. The outer diameter D of the pad is generally not less than (d+1.2) mm, where D is the diameter of the lead. For high-density digital circuits, the minimum diameter of the pad can be (d+1.0) mm. Face recognition is a kind of biometric
