IC697PWR748D使用书,GE使用教程
VMIC产品的维护和保养。如果产品出现故障用户应验证以下内容：
a、 软件b、 系统配置c、 电气连接d、 跳线或配置选项e、 电路板完全插入其正确的连接器位置f、 接头针脚清洁无污染g、 当插入或从VMEbus卡固定框架中卸下板h、 电缆和输入/输出连接的质量不建议进行用户级维修。联系VMIC退货材料授权（RMA）编号。此RMA编号必须在任何退货。6.2维护打印本手册的附录包含以下方面的图纸和图表：参考目的。
IC697PWR748D使用书6.3保修VMIC的标准产品保证不存在以下缺陷：材料和工艺有效期为自签署之日起两年（24个月）运输在本保修的解除过程中，VMIC自行决定同意进行任何一项维修或在VMIC的工厂并由VMIC自行决定更换任何零件、组件，子组件附件或任何硬件、软件或系统产品在正确和正常使用情况下，证明材料和工艺存在缺陷。客户应在一个月内向VMIC发出此类缺陷的通知客户发现此类缺陷后的合理时间。为了退回有缺陷的产品或零件，客户必须联系VMIC的客户服务部门获取电话号码。缺陷产品或零件也必须正确装箱和称重。a之后已获得VMIC呼叫票证号和RMA号，缺陷产品或零件可退回（表面不合格品的运输费）VMIC。任何更换或维修的产品或零件将运回客户的费用由VMIC（也包括UPS surface）承担。客户应该知道，上述过程有时可能货物到达VMIC最多需要八（8）天。客户拥有在以下情况下，选择由客户自费装运有缺陷的产品或零件：客户无法承受这种可能的延迟。
This section of the technical manual provides information relative to the
care and maintenance of VMIC's products. Should the products malfunction, the
user should verify the following:
a. Software
b. System configuration
c. Electrical connections
d. Jumper or configuration options
e. Boards fully inserted into their proper connector location
f. Connector pins are clean and free from contamination
g. No components of adjacent boards are disturbed when inserting or
removing the board from the VMEbus card cage
h. Quality of cables and I/O connections
User level repairs are not recommended. Contact VMIC for a Return
Material Authorization (RMA) Number. This RMA Number must be obtained prior to
any return.
6.2 MAINTENANCE PRINTS
The appendix(ices) to this manual contain(s) drawings and diagrams for
reference purposes.
6.3 WARRANTY
VMIC's Standard Products are warranted to be free from defects in
material and workmanship for a period of two years (24 months) from the date of
shipment. In discharge of this warranty, VMIC, at its option, agrees to either repair
or replace, at VMIC's facility and at VMIC's discretion, any part, component,
subassembly accessory, or any hardware, software, or system product, which
under proper and normal use proves defective in material and workmanship.
The customer shall provide notice to VMIC of each such defect within a
reasonable time after the customer's discovery of such defect.
In order to return the defective product(s) or part(s), the customer must
contact VMIC's Customer Service Department to obtain a Call Ticket Number. The defective product(s) or part(s) must also be properly boxed and weighed. After a
VMIC Call Ticket Number and RMA Number have been obtained, the defective
product(s) or part(s) may be returned (transportation collect for surface UPS) to
VMIC. Any replaced or repaired product(s) or part(s) will be shipped back to the
customer's at the expense of VMIC (also UPS surface).
The customer should be aware that the above process can sometimes
take up to eight (8) days for the shipment to reach VMIC. The customer has the
option to ship the defective product(s) or part(s) at the customer's own expense if
the customer cannot afford this possible delay.
