EMG ECU01.5操作显示屏,使用配置说明
一旦设置了临时IP地址,就可以使用以太网接口通过网络访问(例如通过机器版编程软件)。然后应使用编程器配置正确的IP地址用于以太网接口。
默认IP地址(0.0.0.0)尝试通过设置IP地址BOOTP默认IP地址值(0.0.0.0),无论是从硬件配置还是备份配置,使以太网接口请求临时IP来自网络上BOOTP服务器设备的地址。报告重复IP地址PACSystems RX7i不会在控制器故障中记录异常或故障表,当它在网络上检测到重复的IP地址时。
EMG ECU01.5操作显示屏多零周期EGD交易所可能不会产生类似的结果样本数量如果在生产期内配置了多个EGD生产的交易所零,交易所可能不会产生类似数量的样本。由于道路当多个交换“以最快的速度”进行调度时,就会出现这种调度可能,“一些零周期交换可能会产生更多的样本比其他人。为了获得更一致的EGD生产,请配置生产的EGD与非零生产期的交换。SRTP时更改IP地址连接打开可能会生成日志事件与远程SRTP客户端建立的开放SRTP服务器连接不是当RX7i的IP地址更改时(通常通过存储RX7i的新硬件配置)。90系列SRTP客户端(“SRTP通道”)报告9690H或0190H状态;SRTP连接可能保持打开状态直到连接因客户端超时而终止。90-70系列数据报不是支持不支持90-70系列数据报。这意味着90-70系列-格式来自主机通信工具包应用程序的变量列表请求将失败。(90-30系列-支持格式化数据报,但无法访问中的%P或%L内存RX7i.)
AUP参数不应为改变高级用户参数“wsnd\u buf”不应由用户更改。更改此参数的值可能会导致LAN LED熄灭,并且用于断开连接的以太网接口。重载会阻塞车站
如PACSystems Station Manager的TCP/IP通信中所述手动,GFK-2225,第1章,重型EGD和/或SRTP负载可阻塞电站管理器操作。
Once a temporary IP address has been set up, the Ethernet Interface can be
accessed over the network (such as by the Machine Edition programming
software). The programmer should then be used to configure the proper IP address
for the Ethernet Interface.
Default IP address (0.0.0.0)
attempts to set IP address via
BOOTP
The default IP address value (0.0.0.0), whether obtained from HW Configuration or
backup configuration, causes the Ethernet Interface to request a temporary IP
address from a BOOTP server device on the network.
Reporting of duplicate IP address The PACSystems RX7i does not log an exception or a fault in the Controller Fault
Table when it detects a duplicate IP address on the network.
Multiple zero period EGD
exchanges may not produce similar
numbers of samples
If more than one EGD produced exchange is configured for a production period of
zero, the exchanges may not produce similar numbers of samples. Due to the way
that scheduling occurs when multiple exchanges are scheduled “as fast as
possible,” some zero period exchanges may produce significantly more samples
than others. For more consistent EGD production, configure the produced EGD
exchanges with non-zero production periods.
Changing IP address while SRTP
connection open may generate log
events
Open SRTP Server connections established with a remote SRTP client are not
terminated as expected when the RX7i’s IP address is changed (typically by storing
a new HW Configuration to the RX7i). A Series 90 SRTP client (“SRTP channels”)
reports either a 9690H or 0190H status; the SRTP connection may remain open
until the connection is terminated as a result of a client timeout.
Series 90-70 datagrams are not
supported
Series 90-70 datagrams are not supported. This means that Series 90-70 - format
variable list requests from Host Comm Toolkit applications will fail. (Series 90-30 –
format datagrams are supported, but cannot access %P or %L memory in the
RX7i.)
AUP parameter should not be
changed
The Advanced User Parameter “wsnd_buf” should not be changed by the user.
Changing the value of this parameter may cause the LAN LED to go out and the
Ethernet Interface to drop connection.
Heavy load can block station
manager
As explained in TCP/IP Communications for PACSystems Station Manager
Manual, GFK-2225, Chapter 1, a heavy EGD and/or SRTP load can block Station
Manager operation.