PMC-6130-J自动化板卡,MOTOROLA中文PDF用户手册
这是以秒为单位的时间自动引导顺序将延迟启动启动。目的延迟是指允许您选择
使用刹车停止后备箱钥匙时间值从0到255秒。您可以指定字符串（文件名）它被传递给正在执行的代码已启动。最大长度为16字符。默认值为空字符串。ROMboot功能已禁用。通电时尝试ROMboot只有VMEbus地址空间将不会由ROMboot访问。这是以秒为单位的时间ROMboot序列将延迟启动启动。
PMC-6130-J自动化板卡目的延迟是指允许您选择使用刹车停止后备箱钥匙时间值从0到255秒。错误出现时测试的第一个位置搜索ROMboot模块。上次测试错误时的位置
搜索ROMboot模块。网络自动引导功能为残废尝试在上进行网络自动引导仅通电重置。网络控制器模块的LUN当前受错误支持。默认值为00。当前网络设备的LUN由Bug支持。默认值为00。这是以秒为单位的时间网络引导顺序将延迟启动引导之前。目的因为延迟是为了允许您选择通过使用断开键。时间值从0开始通过255秒。
这是网络的地址接口配置参数将保存在NVRAM中；这些参数是必需的执行无人值守操作的参数网络引导。如果你用NIOT调试器命令，这些参数需要保存在NVRAM中，在地址的某个地方范围$FFFC0000到$FFFC0FFF。NIOT公司参数不超过大小为128字节。这个
这些的位置参数已确定通过设置此环境指针。如果您使用过完全相同的空间你自己的计划信息或命令，它们将覆盖并丢失。Bug开始搜索工作页（64KB内存块）用于向量表、堆栈和变量。这必须是的倍数调试器工作页，模10000美元（64KB）。在multi-187中环境，每个MVME187板可以设置为在允许多个同时运行的调试器来自同一个内存
This is the time in seconds that the
Auto Boot sequence will delay before
starting the boot. The purpose for the
delay is to allow you the option of
stopping the boot by use of the Break
key. The time value is from 0 through
255 seconds. You may specify a string (filename)
which is passed on to the code being
booted. Maximum length is 16
characters. Default is the null string. ROMboot function is disabled.ROMboot is attempted at powerup
only. VMEbus address space will not be
accessed by ROMboot. This is the time in seconds that the
ROMboot sequence will delay before
starting the boot. The purpose for the
delay is to allow you the option of
stopping the boot by use of the Break
key. The time value is from 0 through
255 seconds. First location tested when the Bug
searches for a ROMboot Module.Last location tested when the Bug
searches for a ROMboot Module. Network Auto Boot function is
disabled. Network Auto Boot is attempted at
power-up reset only. LUN of a network controller module
currently supported by the Bug.
Default is 00. LUN of a network device currently
supported by the Bug. Default is 00. This is the time in seconds that the
Network Boot sequence will delay
before starting the boot. The purpose
for the delay is to allow you the option
of stopping the boot by use of the
Break key. The time value is from 0
through 255 seconds.
This is the address where the network
interface configuration parameters
are to be saved in NVRAM; these
parameters are the necessary
parameters to perform an unattended
