Triconex 3624 数字输出模块 PDF资料
1.产 品 资 料 介 绍：
中文资料：
Triconex 3624 是 Tricon 系列中的一款数字输出模块，设计用于支持高可靠性、实时响应的工业自动化和安全仪表系统（SIS）。作为关键组件，它能够执行数字信号的输出控制，确保系统能准确响应和控制过程。
主要技术参数：
输出类型：
- 数字输出： 提供稳定的开关输出，适用于各类设备的控制需求。
- 输出通道数： 通常为 8 或 16 通道，具体型号可能有所不同。
输出规格：
- 每个输出通道通常支持 24 V DC 继电器输出或晶体管输出，能直接驱动负载。
- 具有短路保护、过载保护和过压保护功能，增强了安全性。
冗余设计：
- 该模块支持热插拔冗余设计，确保在发生故障时不会影响系统运行。
- 双电源输入： 提供更高的可靠性，避免单电源故障时对系统的影响。
通信协议：
- 通常与 Triconex 系统的主控单元通过高速通信协议连接（如 TCM、Triconex ControlNet 或其他专用网络），保证高速和可靠的数据交换。
诊断功能：
- 自我诊断： 内建自诊断机制，可实时监控输出状态，并在发生故障时通知控制系统。
- 报警机制： 如果模块输出出现故障，能及时报告，减少系统停机时间。
环境和电源要求：
- 工作温度： -20°C 至 +60°C（具体工作环境温度根据应用可能有所不同）。
- 湿度： 模块可承受高达95%的湿度。
- 电源要求： 通常使用 24V DC 电源供电，但具体电压值应参照产品规格书确认。
英文资料：
The Triconex 3624 is a digital output module in the Tricon series designed to support high reliability, real-time response industrial automation and safety instrumented systems (SIS). As a key component, it can perform output control of digital signals, ensuring that the system can accurately respond and control the process.
Main technical parameters:
Output type:
Digital output: Provides stable switch output, suitable for control needs of various devices.
Number of output channels: usually 8 or 16 channels, specific models may vary.
Output specifications:
Each output channel typically supports 24V DC relay output or transistor output, which can directly drive the load.
It has short-circuit protection, overload protection, and overvoltage protection functions, enhancing safety.
Redundant design:
This module supports hot swappable redundancy design to ensure that system operation is not affected in the event of a failure.
Dual power input: Provides higher reliability and avoids the impact on the system in the event of a single power failure.
Communication protocol:
Usually connected to the main control unit of the Triconex system through high-speed communication protocols (such as TCM, Triconex ControlNet, or other dedicated networks), ensuring high-speed and reliable data exchange.
Diagnostic function:
Self diagnosis: Built in self diagnosis mechanism, which can monitor the output status in real time and notify the control system when a fault occurs.
Alarm mechanism: If there is a malfunction in the module output, it can be reported in a timely manner to reduce system downtime.
Environmental and power requirements:
Working temperature:- 20 ° C to+60 ° C (specific working environment temperature may vary depending on the application).
Humidity: The module can withstand up to 95% humidity.
Power requirements: Typically, a 24V DC power supply is used for power supply, but the specific voltage value should be confirmed in accordance with the product specifications.
2.产 品 展 示
3.其他产品
4.其他英文产品
Radisys EPC-3307 processor board
ASEA 57360001-AN circuit board
Kollmorgen 6SM37M-6000 servo motor
| PMB33C-10114-02 | 07BA60R1 | P21NRXB-LNS-NS-05 |
| PMB33C-10114-01 | 70 BV 01b-E | N31HRHK-LNK-NS-00 |
| PMB33C-10114-00 | AMAT 0100-01341 | PXKB201 |
| PMB33C-10101-03 | AMAT 0110-02336 | 57160001-UZ DSDI 120 |
| PMB33C-10101-02 | IMBLK01 | 3BSE004985R1 DSRF 187 |
| PMB33C-10101-01 | 07BR60R1 | P21NSXS-LSS-NS-08 |
| PMB33C-10101-00 | 07NG60R1 | P22NRXA-LSN-NS-02 |
| PMB33C-10100-03 | 07ZB69R2 | P22NRFB-LNN-NS-00 |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
