TRICONEX 3720卡件数字量,TRICONEX 3720配置教程
PACSystems RX7i控制器：固件版本5.50或更高版本。
7.要在任何GMR系统中使用增强诊断模式，版本需要4.05的GMR系统软件。
不要在以下情况下启用Genius NIU的增强诊断模式：使用GMR系统软件版本的GMR系统的一部分4.04或更早。
8.在任何GMR系统中使用GMR CPU冗余模式，需要4.05版本的GMR系统软件。
TRICONEX 3720卡件数字量不设置
Genius NIU上GMR的CPU冗余参数，即使用GMR系统软件版本4.04的系统的一部分或更早。
9.VersaMax模拟输入模块IC200ALG240、IC200ALG620和安装在Genius输入/输出站的IC200ALG630必须升级到固件版本1.20或更高版本。以前版本的模拟输入模块固件可能会导致输入/输出模块意外丢失与任何Genius NIU固件版本一起使用时出现故障。看见
有关更多信息，请参阅“3.20版解决的问题”。正在升级▪ IC200GBI001-HL取代IC200GBI001-GK和以前的硬件和固件的版本。
▪ 硬件版本IC200GBI001 Gx和更高版本的硬件可以在现场升级到固件版本3.20，并用于安全认证应用。
▪ 版本3.20固件可以下载到任何硬件天才牛的改版。但是，-Fx和早期硬件版本不包括外部窗口看门狗计时器环行因此，Fx和更早版本未经认证可用于GMR系统的安全相关部分。
▪ 对于需要更新GNIU固件的用户，提供了一个固件升级工具包
升级需要PC到NIU串行电缆IC200CBL002。
PACSystems RX7i controllers: Firmware version 5.50 or higher.
7. To use Enhanced Diagnostics mode in any GMR System, version
4.05 of the GMR System Software is required.
Do not enable Enhanced Diagnostics Mode on a Genius NIU that is
part of a GMR system that is using GMR System Software version
4.04 or earlier.
8. To use the GMR CPU Redundancy mode in any GMR system,
version 4.05 of the GMR System Software is required. Do not set
the CPU Redundancy parameter to GMR on a Genius NIU that is
part of a system that is using GMR System Software version 4.04
or earlier.
9. VersaMax analog input modules IC200ALG240, IC200ALG620 and
IC200ALG630 installed in Genius I/O stations must be upgraded to
firmware version 1.20 or later. Previous versions of analog input
module firmware may produce unexpected Loss of I/O Module
faults when used with any Genius NIU firmware version. See
“Problems Resolved for Release 3.20” for more information.Upgrading
▪ The IC200GBI001-HL replaces IC200GBI001-GK and previous
versions of the hardware and firmware.
▪ Hardware version IC200GBI001-Gx and later hardware versions
can be upgraded in the field to firmware revision 3.20 and used in
safety-certified applications.
▪ Version 3.20 firmware may be downloaded to any hardware
revision of the Genius NIU. However, -Fx and earlier hardware
versions do not include the external windowed watchdog timer
circuit. Thus, versions Fx and earlier are not certified for use in the
safety-relevant portion of a GMR system.
▪ For users who want newer GNIU firmware, a firmware upgrade kit
is available for download at http://gefanuc.com/support. Firmware
upgrades require a PC to NIU serial cable, IC200CBL002.
