3BHE039203R0101模块IGCT,5SHY4045L0006卡件
每次输入/输出通信处理器和通道
•验证握手和中断
CPU之间的信号，每个I/O通信处理器和频道
•检查每个输入/输出通信处理器和通道微处理器、ROM、共享
RS的内存访问和环回-485收发器3BHE039203R0101
•验证TriClock和TriBusinterfacesTricon通信单元
Tricon通信模块（TCM），仅与兼容
Tricon v10.0及更高版本系统，允许
Tricon与TriSta 1131、其他Tricon或Trident通信
Modbus主从控制器设备和外部主机以太网。
每个TCM包含四个串行端口，
两个网络端口和一个调试端口3BHE039203R0101模块IGCT,5SHY4045L0006卡件
（用于Triconex）。
每个串行端口都有唯一的地址
并可配置为Modbus
主或从。串口#1支持
Modbus或Trimble GPS
界面串行端口#4支持
Modbus或TriStation接口。
每个TCM支持聚合数据
每秒460.8千比特的速率
四个串行端口。
任何标准Modbus设备都可以
通过以下方式与Tricon通信
TCM，前提是别名
分配给Tricon变量。别名
当主机
Tricon Communication
Module
The Tricon Communication Module
(TCM), which is compatible with only
Tricon v10.0 and later systems, allows
the Tricon to communicate with TriSta
tion 1131, other Tricon or Trident
controllers, Modbus master and slave
devices, and external hosts over
Ethernet networks.
Each TCM contains four serial ports,
two network ports, and one debug port
(for Triconex use).
Each serial port is uniquely addressed
and can be configured as a Modbus
master or slave. Serial Port #1 supports
either the Modbus or the Trimble GPS
interface. Serial Port #4 supports either
the Modbus or the TriStation interface.
Each TCM supports an aggregate data
rate of 460.8 kilobits per second, for all
four serial ports.
Any standard Modbus device can
communicate with the Tricon through
the TCM, provided that aliases are
assigned to the Tricon variables. Alias
numbers must also be used when host
