VMIVME-2128燃机卡件,GE电气VMIVME-2128
控制器已通过以下国际公认标准认证，符合多项国际公认标准
认证机构，这些认证使Tricon在世界各地的安全关键应用中获得了使用资格。各部门的测试报告
可根据要求提供认证机构。
TÜV莱茵-TÜV已证明Tricon v9和v10控制器VMIVME-2128标准
如下所列，因此有资格在以下应用程序和司法管辖区中使用。
•紧急安全停机或其他需要SIL 1-3认证的关键控制应用，符合
IEC 61508 9（仅限Tricon v9.6或更高版本）
•紧急安全关闭或其他关键控制应用程序需要AK 1-AK6认证，符合VMIVME-2128燃机卡件
DIN V 19250和DIN V VDE 0801（仅限Tricon v9.x）
•需要根据EN 54要求进行认证的火灾和气体探测应用
•火灾和气体探测应用需要根据NFPA 72的要求进行认证（仅限Tricon v9.6或更高版本）
•燃烧器管理应用需要根据DIN VDE 0116的要求进行认证
•燃烧器管理应用需要根据NFPA 8501或NFPA 8502的要求进行认证（仅限Tricon v9.6或更高版本）
•欧盟或其他司法管辖区内要求符合EMC指令89/336/EEC和低压的所有应用
第72/23/EEC号设备指令
•欧盟或其他司法管辖区内的所有应用程序都需要符合ATEX指令第94/9/EC号，适用于2区IIB组
危险场所
•半导体制造设施中的环境、健康和安全应用符合SEMI S2的要求
对于危险位置应用，请参阅Tricon规划和安装指南，以获取特定应用的安装说明
International Approvals
The Tricon controller has been certified as complying with multiple internationally recognized standards by the following internationally recognized
certification agencies, these certifications have qualified the Tricon for use around the world in safety critical applications. Test reports from the various
certification agencies are available upon request.
TÜV Rheinland — TÜV has certified that the Tricon v9 and v10 controllers are in full compliance with the internationally recognized standards
listed below, and thus are qualified for use in the following applications and jurisdictions.
• Emergency safety shut-down or other critical control applications requiring SIL 1-3 certification per the functional safety requirements of
IEC 61508 9 (only Tricon v9.6 or later)
• Emergency safety shut-down or other critical control applications requiring AK 1-AK6 certification per the functional safety requirements of
DIN V 19250 and DIN V VDE 0801 (only Tricon v9.x)
• Fire and gas detection applications requiring certification per the requirements of EN 54
• Fire and gas detection applications requiring certification per the requirements of NFPA 72 (only Tricon v9.6 or later)
• Burner management applications requiring certification per the requirements of DIN VDE 0116
• Burner management applications requiring certification per the requirements of NFPA 8501 or NFPA 8502 (only Tricon v9.6 or later)
• All applications in the European Union or other jurisdictions requiring compliance with the EMC Directive No. 89/336/EEC and Low Voltage
Equipment Directive No. 72/23/EEC
• All applications in the European Union or other jurisdictions requiring compliance with the ATEX Directive No. 94/9/EC for Zone 2, Group IIB
hazardous locations
• Environmental, health, and safety applications in semiconductor manufacturing facilities per the requirements of SEMI S2
For hazardous location applications, see the Tricon Planning and Installation Guide for application-specific installation instructions
