BENTLY 106M1079-01监测器卡件,106M1079-01模块
通信协处理器模块（IC693CMM311）提供了高性能
所有Series 90-30模块化CPU的协处理器（不能与嵌入式CPU一起使用-型号
311、313或323）。该模块支持GE Fanuc CCM通信协议RTU
106M1079-01
（Modbus）从通信协议和SNP协议。该模块有两个串行端口。
端口1支持RS-232应用程序，端口2支持RS-232或RS-485应用程序。
可以使用配置软件或默认设置配置模块。
由于两个串行端口都连接到模块的单个连接器，因此需要使用IC693CBL305 Y形电缆
该模块用于分离两个端口，以便于接线。带有331或BENTLY 106M1079-01
较高的CPU最多可以有四个CMM（仅在CPU基板中）。
The Communications Coprocessor Module (IC693CMM311) provides a high performance
coprocessor for all Series 90-30 modular CPUs (cannot be used with embedded CPUs - models
311, 313, or 323). This module supports the GE Fanuc CCM communications protocol, the RTU
(Modbus) slave communications protocol, and the SNP protocol. This module has two serial ports.
Port 1 supports RS-232 applications and Port 2 supports either RS-232 or RS-485 applications.
The module can be configured using the configuration software, or by using a default setup.
Since both serial ports are wired to the module’s single connector, an IC693CBL305 Wye cable is
supplied with this module to separate the two ports for ease of wiring. A system with a 331 or
higher CPU can have up to four CMMs (in the CPU baseplate only).
